FUTO Postgraduate Admission Form – 2016/2017

Filed in Uncategorized by on August 18, 2016 0 Comments

FUTO Postgraduate Admission Form – This is to inform the public that the Federal University of technology, Owerri (FUTO) has announced the sales of Postgraduate forms for 2016/2017 academic session. The detailed information on this is contained on the attached pdf document;

FUTO logo

CLOSING DATE:
The website will close on November 30, 2016 and all submission of documents as in E above will close on same day. All successful candidates will be notified via mail/SMS.

FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI POSTGRADUATE SCHOOL

 

 

2016/2017 POSTGRADUATE APPLICATION

 

  1. A. The Postgraduate School,  Federal  University  of  Technology,  Owerri  (FUTO)  invites applications from suitably qualified candidates for consideration for admission into the underlisted Diploma, Masters and Doctorate Degree programmes for the 2016/2017 session under Regular, Centre for Continuing Education (CCE), Institute of Women/Gender and Development Studies (IWoGDS) and Institute of Erosion Studies.

Any interested candidate should pay a non-refundable fee of eleven thousand, three hundred naira (N11,300.00) only at any of the Deposit Money Banks (DMB) through the Remita Gateway on the Postgraduate application platform and then complete the online application at www.futo.edu.ng

 

  1. ADMISSION REQUIREMENTS

All candidates applying for any of the following postgraduate programmes must satisfy the basic  matriculation  requirements  including  English  Language  and  Mathematics  as required by the Department.

 

  1. 1. PGD

Candidates applying for the Postgraduate Diploma (PGD) programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:

  1. i) Higher National Diploma (HND) Upper Credit or above
  2. ii) Bachelors Degree in the relevant discipline from FUTO or any other recognized

University with at least a Third Class Honours.

iii)        A good Bachelors Degree with at least Second Class Honours in other related disciplines.

 

 

  1. 2. M.Sc, M.Eng, MPH

Candidates applying for the M.Sc, M.Eng, MPH programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:

 

 

  1. i) A first degree with at least a second class honours qualification with a minimum of

3.00 CGPA on a 5-point scale or 2.50 CGPA on a 4-point scale in the related area from FUTO or from any other recognized University.

  1. ii) A Bachelors degree from a recognized University plus a PGD of not less than 3.50

CGPA on a 5-point scale and a 3.00 CGPA on a 4-point scale in the relevant area.

  1. 3. MBA

Candidates applying for the MBA programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:

  1. i) A  good  honours  Degree  in  the  area  of  Science/Technology,  Engineering  and

Management Technology from FUTO or from any other recognized University.

  1. ii) Graduates with first degree from a recognized University and holders of Higher National Diploma (HND) with Postgraduate Diploma may apply for the MBA programme

 

  1. 4. D

Candidates applying for the Ph.D programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:

  1. i) A Master’s degree with a CGPA of 4.00 on a 5.00 point scale or 3.0 on a 4.0 point scale or its equivalent in the relevant areas from FUTO or any recognized University
  2. ii) Any  other   qualification   as   the   University   Senate   may   from   time   to   time recognize/approve.
  3. DURATION OF PROGRAMMES
  4. i) D Programmes: A minimum of six (6) semesters and a maximum of ten (10) semesters for full-time and minimum of eight (8) semesters and a maximum of fourteen (14) semesters for part-time students.

 

  1. ii) M.Sc, M.Eng, MPH and MBA Programmes: A minimum of three (3) semesters and a  maximum  of  six  (6)  semesters  for  full-time  and  minimum  of  four  (4) semesters and a maximum of eight (8) semesters for part-time students

iii)        PGD Programmes: A minimum of two (2) semesters and a maximum of four (4) semesters for full-time and minimum of four (4) semesters and a maximum of six (6) semesters for part-time students.

NOTE: Candidates with Bachelor of Master’s degree in Education (B.Ed and M.Ed) need not apply

 

  1. METHOD OF APPLICATION

Candidates are advised to apply on-line following the procedure given below:

 

Step 1: Go to the FUTO Website – www.futo.edu.ng

 

Step 2: Click on Prospective Students.

Step 3: Go to PG Application Form 2016/2017

 

Step 4: Click on on-line application for PG (Regular) or CCE (PG) Weekend Programme or Institute of Women/Gender and Development Studies or Institute for Erosion Studies application

Step 5: Click on generate 2016/2017 PG Application Invoice

 

Step 6: Enter your Telephone Number

 

Step 7: Click on Sign In

 

Step 8: Print your invoice containing your RRR number (Remita Retrieval Reference) and proceed to the bank for payment or make payment via ATM card.

Step 9: Go  to any bank with  your invoice  and pay a  non-refundable fee  of Eleven thousand three hundred naira (N11,300.00) for FUTO PGS or CCE or IWoGDS or IES application depending on your interest.

Step 10: Return to Step 4 above

 

Step 11: Click on Fill PG Application form 2016/2017

 

Step 12: Enter your Remita Number from the bank

 

Step 13: Fill the on-line form accordingly

 

NOTE: Make sure the referee email address supplied is valid as a referee form link would be sent to your referees for completion online.

Step 14: Print out a copy of the Acknowledgement Slip when the form is completed. Also an acknowledgement would be sent to the email address you provided while filling the form. Therefore make sure you provide a valid personal e-mail address.

 

 

For more enquires send an email to ict@futo.edu.ng

 

  1. E. DOCUMENTS TO UPLOAD TO THE PG SCHOOL PORTAL

 

Candidates should upload the following relevant documents in support of their application online

  1. University Degree Certificates/Statement of Result ii.  NYSC Discharge Certificate/Exemption Certificate iii.  “O” Level Result

 

SUBMISSION OF ACADEMIC TRANSCRIPT:

 

All applicants must forward their transcript to reach the Deputy Registrar/Secretary, Postgraduate School, Federal University of Technology, Owerri, Imo State, Nigeria, not later than December 20, 2016.

Please note that any application without Transcript will not be considered for admission.

 

CLOSING DATE:

 

The website will close on November 30, 2016 and all submission of documents as in E

 

above will close on same day. All successful candidates will be notified via email/SMS.

 

  1. AVAILABLE POSTGRADUATE PROGRAMMES

 

1.0     SCHOOL OF AGRICULTURE AND AGRICULTURAL TECHNOLOGY (SAAT)

 

1.1     DEPARTMENT OF AGRICULTURAL ECONOMICS

  1. a) M.S and Ph.D Degrees in Agricultural Economics with specialization in:
  2. i) Farm Management and Production Economics ii)        Agricultural Development and Policy

iii)       Agricultural Marketing and Cooperatives iv)       Agricultural Finance

  1. v) Agricultural Project Planning and Analysis
  2. vi) Agricultural Resources and Environmental Economics b) PGD in Agricultural Economics

1.2     DEPARTMENT OF AGRICULTURAL EXTENSION

  1. a) M.S and Ph.D Degrees in Agricultural Extension with specialization in:
  2. i) Agricultural Extension Administration ii)        Programme Planning and Evaluation iii)       Rural Sociology
  3. iv) Agricultural Extension Communication v)       Community and Rural Development
  4. vi) Indigenous Knowledge Systems in Agricultural and Rural Development b) PGD in Agricultural Extension

1.3     DEPARTMENT OF ANIMAL SCIENCE AND TECHNOLOGY

  1. a) PGD, M.S  and  Ph.D  Degrees  in  Animal  Science  and  Technology  with specialization in:
  2. i) Animal Breeding and Genetics ii)        Animal Management

iii)       Animal Nutrition iv)       Animal Products

  1. v) Reproductive Physiology

 

  1. b) PGD in Animal Science and Technology

 

1.4     DEPARTMENT OF CROP SCIENCE AND TECHNOLOGY

  1. a) M.Sc and Ph.D Degrees in Crop Science and Technology with specialization in:
  2. i) Agronomy
  3. ii) Seed Technology

iii)       Plant Breeding and Genetics iv)       Farming Systems

  1. v) Crop Physiology
  2. vi) Horticulture and Landscaping

vii)      Crop Protection with options in the following:

  • Mycology
  • Nematology
  • Weed Science
  • Agricultural Entomology
  • Bacteriology
  • Virology

 

  1. b) PGD in Crop Science and Technology

 

1.5     DEPARTMENT OF SOIL SCIENCE AND TECHNOLOGY

  1. a) M.S and Ph.D. Degrees in Soil Science and Technology with specialization in:
  2. i) Soil Science
  3. ii) Soil Genesis and Classification iii)    Soil Physics/Soil Conservation
  4. iv) Soil Survey and Land-use Planning v)     Soil Microbiology
  5. vi) Soil Fertility

vii)   Soil Chemistry

viii)  Soil and Environmental Management b) PGD in Soil Science and Technology

1.6     DEPARTMENT OF FISHERIES AND AQUACULTURE TECHNOLOGY

M.Sc. in Fisheries and Aquaculture Ph.D. in Fisheries and Aquaculture PGD in Fisheries and Aquaculture

 

2.0     SCHOOL OF ENGINEERING AND ENGINEERING TECHNOLOGY (SEET)

2.1     DEPARTMENT OF AGRICULTURAL and BIO-RESOURCES ENGINEERING

M.Eng and Ph.D. Degrees in Agricultural Engineering with specialization in:

  1. i) Farm Power and Machinery Engineering Technology ii)        Soil and Water Engineering Technology

PGD in Agricultural Engineering (Note: Only candidates with 3rd class are qualified for PGD in Agricultural Engineering)

 

2.2     DEPARTMENT OF CHEMICAL ENGINEERING

Ph.D  Degree in Chemical Engineering with options in:

  1. i) Chemical Reaction Engineering ii)     Process Plant Design

iii)    Refinery/Gas Engineering iv)    Separation Processes

  1. v) Simulation and Optimization
  2. vi) Systems Dynamics and Control

vii)   Chemical Engineering Thermodynamics

 

 

M.Eng. in Chemical Engineering

PGD in Chemical Engineering

 

2.3     DEPARTMENT OF CIVIL ENGINEERING

M.Eng. and Ph.D  Degrees in Civil Engineering with specialization in:

  1. i) Water Resources Engineering ii)     Structural Engineering

iii)    Public Health Engineering

 

PGD in Civil Engineering only

 

2.4     DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING M.Sc. and Ph.D   Degrees in Electrical and Electronic Engineering with specialization in:

  1. i) Electronic Power Engineering ii)     Communication Engineering iii)    Control Engineering
  2. iv) Electronic and Computer Engineering

PGD in Electrical and Electronic Engineering

 

 

2.5     DEPARTMENT OF FOOD SCIENCE AND TECHNOLOGY

M.Sc. and Ph.D   Degrees in Food Science and Technology with specialization in:

  1. i) Food Microbiology
  2. ii) Food Chemistry and Nutrition
  3. iv) Beverage and Brewing Technology v)       Food Processing Technology

PGD in Food Science and Technology

 

 

2.6     DEPARTMENT OF MATERIALS AND METALLURGICAL ENGINEERING M.Eng. and Ph.D   Degrees in Materials and Metallurgical Engineering with specialization in:

  1. i) Materials Engineering
  2. ii) Metallurgical Engineering

 

 

2.7     DEPARTMENT OF MECHANICAL ENGINEERING

M.Eng. and Ph.D   Degrees in Mechanical Engineering with specialization in:

  1. i) Industrial Production Engineering ii)        Energy and Power Engineering

iii)       Automated Design and Manufacturing

 

 

2.8     DEPARTMENT OF PETROLEUM ENGINEERING

M.Eng. and Ph.D   Degrees in Petroleum Engineering with specialization in:

  1. i) Reservoir Engineering ii)        Production Engineering iii)       Drilling Engineering
  2. iv) Natural Gas Engineering vi)       Petroleum Economics PGD in Petroleum Engineering

 

2.9     DEPARTMENT OF POLYMER AND TEXTILE ENGINEERING

M.Sc. and Ph.D   Degrees in Polymer and Textile Engineering with specialization in:

  1. i) M.S in Polymer Science and Engineering ii)        M.Sc. in Textile Science and Engineering iii)       Ph.D  in Polymer Science

iii)       Ph.D  in Textile Science

3.0     SCHOOL OF MANAGEMENT TECHNOLOGY (SMAT)

 

 

3.1     DEPARTMENT OF PROJECT MANAGEMENT TECHNOLOGY

Ph.D, M.Sc. and MBA in Project Management Technology with specialization in:

  1. i) Construction Technology ii)        Manufacturing Systems

iii)       Industrial Process Technology

 

 

PGD with options in:

  1. i) Construction Technology ii)        Manufacturing Systems

 

 

3.2     DEPARTMENT OF MANAGEMENT TECHNOLOGY

PGD, MBA, M.Sc. and Ph.D  Degrees in:

  1. i) Financial Management Technology ii)        Management Technology

 

 

3.3     DEPARTMENT OF TRANSPORT MANAGEMENT TECHNOLOGY

MBA, M.Sc. and Ph.D Degrees in:

Transport Management Technology with specialization in:

  1. i) Aviation Management
  2. ii) Transport Planning and Management iii)       Maritime Management Technology MBA options:
  3. i) Sea Transport Management ii)        Air Transport Management iii)       Transport Management
  4. iv) Logistics Management

PGD in Transport Management Technology

 

3.4     DEPARTMENT OF MARITIME MANAGEMENT TECHNOLOGY MBA, M.Sc. and Ph.D Degrees in Maritime Management Technology M.Sc. options:

  1. i) Maritime Economics and Finance ii)        Marine Transport Management

PGD in Maritime Management Technology

 

 

3.5     DEPARTMENT OF INFORMATION MANAGEMENT TECHNOLOGY

PGD, MBA, M.Sc. and Ph.D  Degrees in Information Management Technology

 

 

 

4.0     SCHOOL OF ENVIRONMENTAL SCIENCES (SOES)

4.1     DEPARTMENT OF ENVIRONMENTAL TECHNOLOGY

 

M.Sc. and Ph.D   Degrees in Environmental Technology with specialization in:

  1. i)  Pollution Control Technology
  2. ii) Flood and Erosion Control Technology iii)       Geo-Environmental Technology

PGD in Environmental Technology

 

 

 

5.0     SCHOOL OF BIOLOGICAL SCIENCES (SOBS)

 

5.1     DEPARTMENT OF BIOLOGY

 

M.Sc and Ph.D degrees in Biology Science with specialization in i)        Applied Entomology and Parasitology

  1. ii) Environmental Conservation and Management iii)       Mycology and Plant Pathology

PGD in Biological Science

 

5.2     DEPARTMENT OF BIOTECHNOLOGY

M.Sc. and Ph.D Degrees in Biotechnology with specialization in:

  1. i) Biotechnology
  2. ii) Environmental Health Biology

 

 

5.3     DEPARTMENT OF MICROBIOLOGY

M.Sc. and Ph.D Degrees in Microbiology with specialization in:

  1. i) Food/Industrial Microbiology ii)        Medical Microbiology

iii)       Environmental Microbiology

PGD in Applied Microbiology

 

5.4     DEPARTMENT OF BIOCHEMISTRY

M.Sc. and Ph.D  Degrees in Biochemistry with specialization in:

  1. i) Industrial Biochemistry
  2. ii) Environmental Biochemistry iii)       Medical Biochemistry
  3. iv) Pharmacology Biochemistry
  4. v) Nutrition and Toxicological Biochemistry

PGD in Biochemistry

 

 

 

 

6.0     SCHOOL OF PHYSICAL SCIENCES (SOPS)

 

 

6.1     DEPARTMENT OF COMPUTER SCIENCE

M.Sc. and Ph.D  Degrees in Computer Science.

 

 

6.2     DEPARTMENT OF GEOSCIENCES

M.Sc. and Ph.D Degrees in Geosciences with specialization in:

  1. i) Geophysics
  2. ii) Petroleum Geology/Sedimentology iii)       Hydrogeology
  3. iv) Environmental Geology

 

 

PGD Geosciences

 

 

6.3     DEPARTMENT OF MATHEMATICS

M.Sc. and Ph.D  Degrees in Mathematics with specialization in:

  1. i) Industrial and Applied Mathematics ii)        Differential Equations

iii)       Control Theory

  1. iv) Elasticity
  2. v) Semi-Group Theory

 

 

6.4     DEPARTMENT OF STATISTICS

  1. M. and Ph.D Degrees in Statistics:
  2. i) Time Series Analysis ii)        Econometrics

iii)       Probability Theory

  1. iv) Multivariate Analysis v)       Demography

PGD in Statistics

 

6.5     DEPARTMENT OF PHYSICS

M.Sc. and Ph.D  Degrees in Physics with specialization in:

  1. i) Solid State Physics ii)        Materials Science
  2. i) Solar Energy Physics
  3. ii) Space Physics

iii)       Radiation and Health Physics

 

 

 

7.0     SCHOOL OF HEALTH TECHNOLOGY (SOHT)

 

 

7.1     DEPARTMENT OF PUBLIC HEALTH TECHNOLOGY

M.Sc and Ph.D   in Public Health Technology with specialization in:

  1. i) Environmental Health and Safety Technology
  2. ii) Epidemiology and Disease Control Technology iii)       Disease Control Technology
  3. iv) Health Promotion and Wellness Technology
  4. v) Health Economics

 

 

PGD in Public Health Technology (PGDPH)

 

 

7.2     DEPARTMENT OF BIOMEDICAL TECHNOLOGY

M.Sc. Degrees in Physiokinetics and Biomedical Technology with specialization in:

  1. i) Medical Electronics and Instrumentation ii)        Clinical Engineering
  2. vi) Rehabilitation Engineering

 

G        INSTITUTE OF WOMEN/GENDER AND DEVELOPMENT STUDIES (IWoGDS)

 

 

1)       PGD with specialization in:

(i)   Women and Gender Studies (ii)   Gender and Entrepreneurship (iii)  Gender and Global Health

(iv)  Gender and Agricultural Technology

 

 

 

2)       M.Sc Degree Programme

(i)      Gender and Development Studies

(ii)     Gender and Science

(iii)    Gender and Technology

(iv)    Gender and Agricultural Technology

(v)     Gender and Global Health

(vi)    Gender and Entrepreneurship

 

  1. PROGRAMMES AVAILABLE AT THE CENTRE FOR CONTINUING EDUCATION (CCE)

 

 

SCHOOL OF MANAGEMENT TECHNOLOGY (SMAT)

 

 

  1. 1. DEPARTMENT OF PROJECT MANAGEMENT TECHNOLOGY (MBA, PGD)
  2. i) MBA and PGD in Project Management Technology

 

 

  1. 2. DEPARTMENT OF MANAGEMENT TECHNOLOGY (MBA, PGD)
  2. i) Financial Management Technology ii)        Management Technology

 

 

  1. 3. DEPARTMENT OF INFORMATION MANAGEMENT TECHNOLOGY (MBA, PGD)
  2. i) MBA and PGD in Information Technology

 

 

  1. 4. DEPARTMENT OF TRANSPORT MANAGEMENT TECHNOLOGY (MBA, PGD)
  2. i) Land Transport Management
  3. ii) Transport Economics and Planning  (MBA only)
  4. v) Air Transport Management
  5. vi) Water Transport Management

 

  1. PROGRAMMES AVAILABLE AT THE INSTITUTE FOR EROSION STUDIES (IES)

M.Sc and Ph.D Degrees in Erosion Studies with option in i)  Integrated Watershed Management

  1. ii) Urban Drainage System and Management

 

 

 

 

 

 

 

Orje Ishegh-Nor

Registrar, FUTO


myPastQuestion.com Products and Services:

  • Post UTME Past Questions = from N1,000
  • JAMB Past Questions = N1,500
  • WAEC/NECO Past Questions = N500 per subject
  • Junior (JS33) Past Questions = N1,000 per subject
  • All Scholarship Past Questions = N2,000
  • JUPEB Past Questions = N2,000
  • NDA Past Questions = N2,000
  • NPA Past Questions = N1,500
  • Job Interview Past Questions = N2,000
  • JAMB Original Result = N2,200
  • JAMB Admission Letter = N2,200
  • JAMB Result Checker Card = N2,000
  • WAEC Result Checker Card = N800
  • NECO Result Checker Card = N800
  • Post UTME Success Guide (eBook) = N1,000
  • JAMB CBT Success Guide (eBook) = N1,000
  • Creation of Blogs = N10,000
If you need any of these products or services listed above, Pay to Account: Ifiokobong Ibanga 2003316090 Zenith bank PLC,
AD: Make Money from MMM Nigeria 50% Interest Help


Information is Power! Don't miss any information about your examination or your school because of lack of timely updates. The best thing you should do is to Register for FREE Email Alert! by Mail

About the Author ()

myPastQuestion.com is the largest past question database for all types examination in Nigeria. We have Post UTME Past Questions for all Universities, Polytechnics and Colleges of Education. We also have JAMB CBT Software, Scholarships Past Questions, WAEC and NECO Past Questions. Follow Ifiokobong Twitter and share what you love most.

Leave a Reply

Your email address will not be published. Required fields are marked *