Upstream Oil and Gas Conglomerate Recruitment 2019

An Independent Company with significant interest in the Oil and Gas Industry seeks to engage experience, intelligent and self- motivated Individual(s) to fill the position below:

  1. Job Title: Reservoir Engineer

Location: Nigeria

Minimum Education And Experience

  • The Reservoir Engineering must have a good knowledge of technical practices and principles within reservoir engineering including but not limited to reservoir performance analysis, optimization of fields, development planning, economic evaluation and reserves evaluation.
  • Minimum of Bachelor of Science (B.Sc.) degree in Petroleum Engineering or other relevant Engineering degree with a minimum of Second Class Upper division. A master’s degree or equivalent will be an added advantage.
  • A minimum of seven (7) years post graduate and experience in Reservoir Engineering in the oil industry with an E & P Operator
  • Must have experience in field development planning and well / project economic evaluation
  • Interpret reservoir data, plots and graphs, and apply models to characterize reservoir or field properties. Run well/project economic evaluations, field development planning. decline curve analysis
  • Identify opportunities to optimize producing assets, improve recovery, increase production rate, reserve additions and develop reservoir performance predictions and well as prepare estimates of in- place hydrocarbon volumes
  • Carry out reservoir surveillance, analysis, develop dynamic models and provide direction on subsurface engineering required for proper reservoir management of assets
  • Work with partners and regulatory agencies to gain alignment on well locations, data acquisition
  • Identify opportunities to optimize producing assets, improve recovery, increase production rate and reserve additions
  • Develop reservoir performance predictions.
  • Ensure reservoir and production due diligence on potential farm-ins and acquisitions
  1. Job Title: Petroleum Engineer

Location: Nigeria

Minimum Education And Experience

  • Candidates for this position must have good knowledge of technical practices and principles within reservoir engineering including but not limited to reservoir performance analysis, optimization of fields and production, development planning, economic evaluation and reserves evaluation.
  • The candidates must have in-depth knowledge of modelling, optimization of well inflow and outflow performance, conceptual well and completion design of well reservoir interface and well integrity management.
  • Minimum of Bachelor of Science (B.Sc.) degree in Petroleum Engineering or any Engineering degree with a minimum of Second Class Upper division. A master’s degree or equivalent will be an added advantage.
  • A minimum of seven (7) years of Petroleum Engineering experience with in-depth understanding of geologic formation of rock containing the reservoir consisting with well engineering and rig operations
  • Must have sufficient knowledge to determine the drilling methods, implement drilling plan and monitor operations.
  • Must have experience in field development planning and well / project economic evaluation
  • Identify opportunities to optimize producing assets, improve recovery, increase production rate an reserve additions
  • Develop reservoir performance predictions. Prepare estimates 01in- place hydrocarbon volume
  • Ensure reservoir and production due diligence on potential farm-ins and acquisitions
  • Competency in Microsoft applications including Excel, Word, and Outlook.
  • Identify opportunities to optimize producing assets, improve recovery. increase production rate and reserve additions and develop reservoir performance predictions. Prepare estimates of in-place hydrocarbon volumes
  • Must be a good team player with strong inter personal skills, able to work under pressure, ready to travel at short notice and be willing to relocate if necessary
  1. Job Title: Drilling Engineer

Location: Nigeria

Minimum Education And Experience

  • The Drilling Engineer must have a good knowledge of well engineering, drilling and completions to provide support to company’s operations from the initial design to delivery of a well to production.
  • Must be knowledgeable in drilling and completion practices.
  • Minimum of Bachelor of Science degree in a core Engineering discipline (Second Class Upper). A master’s degree in any of the relevant Engineering disciplines will be an added advantage
  • A minimum of seven (7) years of drilling experience, consisting of well engineering and rig operations is required.
  • Must have strong analytical, technical and operational skills
  • Ability to prepare work schedules and comprehensive drilling plans to meet project objectives and deadlines.
  • Monitoring day-to-day rig operations during drilling and completions operations
  • Provide immediate and effective solutions for operational continuity, equipment malfunctions and other onsite problems.
  • Liaise with project partners, such as geologists and drilling contractors etc. in order to keep up-to-date on all developments that may have an impact on drilling activities.
  • Responsible for executing the appropriate procedures for well drilling projects
  • Ensuring that drilling operations comply with statutory and regulatory requirements, with respect to health and safety and emergency procedures.
  • Must be capable of working seamlessly with geosciences, production and reservoir groups in executing drilling/operations engineering solutions.
  • Must have working knowledge of commonly used and relevant drilling/operations/production management software Must have ability to plan and lead projects and must be able to work under pressure
  1. Job Title: Facility Engineer

Location: Nigeria

Minimum Education And Experience

  • The Senior Facilities Engineer must have a good knowledge of facilities’ practices and principles in piping, process and facility engineering. Must also be competent in conceptual design, FEED and detailed engineering design, including but not limited to the development/review of PFDs & P&lDs, facility revamps, optimization, Debottlenecking of Crude Oil Processing Platforrns/ Flowstation, and Crude Oil Stabilization System.
  • Minimum of a Bachelors degree in Mechanical Engineering or other relevant Engineering degree (Petroleum/Chemical). A Master’s degree in Engineering will be an added advantage. A minimum of ten (10) years of relevant experience in an E&P company with a track record of engineering design/ operations of oil & Gas facilities.
  • Provide support in the design and development of production facilities from conception through implementation, including wellheads, flowlines, pipelines. Dil/water/gas separation, conditioning and processing facilities. Technical evaluation of quotation, project schedule and participate in the commercial evaluation of projects
  • Trouble shoot the process plant problems, suggest feasible short term and long term solution to problems Develop, modify/review scope of work procedures/project execution plan in line with relevant specification and industry codes for job safety analysis
  • Manage and supervise engineering design and installation of repair works on company projects. Must be able to communicate effectively with all levels of Management and Contactors
  • Must be result oriented and committed to company goals
  1. Job Title: Geologist

Location: Nigeria

Requirements

  • This position requires a Bachelors degree in Geology / Geophysics (with minimum of second class upper). A Masters degree in any of these disciplines will be an added advantage.
  • Minimum of ten (10) years of relevant experience in an upstream Company is required for this position.
  • Candidate must be proficient in the use of Geoscience software such as Landmark and Petrel environment with ability to evaluate geological and geophysical interpretation using well logs, production and reservoir data to construct geological! reservoir models.
  • The candidate must be proficient in the use of Geosciences Software particulariy in landmark and petrel environments and with vast knowledge of production geoscience.
  • Must be a good team player with strong interpersonal skills, able to work under pressure and ready to travel at very short notice.
  • Key accountabilities would be to deliver geological and geophysical elements of appraisal & field development projects such as exploration / appraisal I development wells, creating and updating an existing reservoir model, which are well scoped and can deliver long term development scenarios.
  • Integration of logs & production data, seismic data, static & dynamic models to identify bypass pay, upside potential, work over and drilling candidates. Candidate must have competence in the following areas:
  • Proficient in geological evaluation, geophysical interpretation, petrophysical interpretation, innovative mapping using wells, seismic, production and reservoir data experience to construct geological/reservoir models etc.
  • Provide expertise related to field development plan, reserves assessment, asset acquisition, exploration, appraisal and development strategies.
  • Collaborate with exploration geoscientists to ensure all relevant geological and geophysical data is incorporated into field development plans and the execution of field development drilling programs.
  • Collaboration with reservoir, drilling & facility engineers in order to orchestrate subsurface dynamics with facility upgrade or constraints.
  • Ability to collaborate effectively with reservoir, drilling and facilities engineers to orchestrate subsurface dynamics facility upgrade or constraints

Remuneration
Very attractive and highly competitive within the industry.

Deadline: 16th May, 2019.

How to Apply

Interested and qualified candidates should send their Application Letter and CV to: [email protected] with position applied for as subject of the email.

Click here to check your NEW JAMB Result now! AD: Click here to Read Latest School News, Jobs, Scholarships
Click here to see the latest Job Vacancies in Nigeria.

Leave a Reply